Recovery Flasher 05.09.2008 - v1.32

Recovery Flasher 05.09.2008 - v1.32

September 5th, 2008, 23:09 Posted By: wraggster

News/release from Hellcat

H E L L C A T s - R e c o v e r y - F l a s h e r
========================= ========================= =====
* recover semi-bricks * up-/downgrade your CFW *
* flash *ANY* CFW directely to 3.71-/4.01-M33 *
* backup/restore firmware flash (not NAND dump) *
all without Pandora

What is this? And why?
========================= ===============

Short version:
--------------------
Flashes a fresh M33 CFW (3.71, 4.01)
for recovering semi-bricks or to up-/downgrade CFW
does not use Pandora, runns from the recovery menu or the XMB
does not use (as in launch) the original Sony Updater (only extracts
all required files from the original .PBP)
runns fine on CFWs lower than 3.52-M33-3 - handy for upgrading older
FWs w/o the "need to go 3.52, then 3.52-3, then higher" odyssey :-)
runns fine from TimeMachine (3.40-OE on Fat and 3.60-M33 on Slim)
can backup the FW flash and restore selected parts (XMB theme,
settings, PSN activation, complete firmware)

Long Version?
--------------------
Can be found - aside many other infos and details - in the README

Does it work?
========================= ===============
This program has been tested by myself to successfully flash
a fresh 3.71-M33-4 and a 4.01-M33-2 on the following setups:

3.02-OE *) -- on Fat PSP
3.40-OE -- via TimeMachine on Fat PSP
3.60-M33 -- via TimeMachine on Slim PSP
3.71-M33 -- on Fat and Slim PSP
4.01-M33 -- on Fat and Slim PSP
4.01-M33 -- started via DDCv6 (kinda pointless to install a 4.01 then,
but hey, can't hurt to try )
1.50 -- on Fat PSP, using the 1.50 build of the flasher
^^ yes, that reads "one point five", and yes, I flashed directely to 4.01-M33-2 from there

*) Note: On lower CFWs (early OEs, mostly) you may get warnings during
3.71 installation regaring assignments of flash1:
This is normal under theese FW versions, no need to worry.
The program will disable formatting flash1 in that case, so
everything should be fine.

Changes on 1.32 since 1.30

fixed a flaw in the backup/restore functions that made them going haywire on CFWs of 3.52 and below when restoring a full firmware from a backup.
Now works fine on those lower CFWs as well

Well, this one is more "just for fun" than meant serious.... I made an additional build of the app, that runns on unpatched, virgin, original 1.50
Restoring and creating backups works as fine as installing a fresh M33 CFW (3.71/4.01) - YES, you can go from 1.50 STRAIGHT AND NONSTOP to a fresh 4.01-M33 this way!
The other way round also works: restoring a 1.50 from a backup when running on 4.01.
(this might also help people having installed the 1.50 AddOn and so unable to use the original build)

Download and Give Feedback Via Comments

For more information and downloads, click here!