Posted By: wraggster
Z33 has Created a GUI for imposer.exe a tool to modify homescreen when playing games
As it says in the readme/manual, only use impose.prx from a 2.50 or newer firmware, and it has to be from the same firmware version you're running in your PSP! If you have 3.03 OE in your PSP, the impose.prx must be from 3.03 OE! Also impose.rsc must be from 2.70 or newer firmware, but it doesn't need to be the exact same version you're using.
For one thing, you can use the prx/rsc from the OE side (kn) on the 1.50 side (kd) too, but not vice versa.
Problems will appear if you do something described here:
1. impose.prx from a different firmware than what you're running --> (semi)brick, depending if you're using OE with recovery menu or not. Recovery is your friend.
2. impose.prx from <2.50 firmware --> no identification of some vital data for those versions so you only get garbage gfx if you try exporting from one.
3. impose.rsc from <2.70 firmware --> has lesser languages supported so I gave them no support to make things a bit easier to handle internally in imposer.
If you're using prx (decrypted & unpacked) from 2.50+ and rsc from 2.70+ and are still facing problems, it might be you have somewhat different version of the files than what I've tested with. I only have versions from jap 1.00, euro 1.50, usa 2.50 and euro 2.60/2.70/2.80/3.03/3.10 to test with.
Edit: Seems I forgot to mention in the readme/manual (which many seem to ignore anyway) the importance of using the same prx version one has currenty flashed in.
Download and Give Feedback Via Comments